Bio-Sump™

All skimmers operate off the same basic principle and theory: mixing water with air. The differentiation occurs when evaluating who can do this best. That is where MRC® comes out ahead. We have several different skimmer designs, using different technologies for different setups. From our MRC® Pro series, uses ultra efficient pumps, our amazing needlewheel design, and our ingenious MRC®  air aspirator: these filters have been tried, tested, evaluated, and honed to perfectly and ideally create an interface of bubbles and water, by maximizing bubble surface area, dwell time, and maximizing skimming ability. It simply cannot get any better!

N

Simple

Installation has never been easier. Fill, plug, and play. Choose your preferred media then plumb in-line with your current system or use our ECO 132 pump.

Capacity

Between 1430ml & 2740ml the xSeries Reactors are ready for just about any media you could possible throw at them.

Precision

All xSeries Reactors are precisions made with the highest tolerances. We like things to be right and right the first time around.

U

Detail

We’re a bit obsessive at MRC®. We not only made our tubing match, but it’s also food grade and 100% American made.

Lorem Ipsum

The My Reef Creations Bio-sump® is the latest in filtration technology pioneered by MRC.

A sump can be and should be much more than a simple box that holds components. Done right, and it will be a powerful filtration tool that will keep your aquarium in optimal condition. The MRC bio-sump® features MRC’s filter sock chamber with sealed filter socks, forcing 100% of the water through the socks. In case of clogging, the chamber is equipped with an overflow to prevent spills outside of the sump. The inset lid will keep all noise and splashing inside the sump, giving you clean AND quiet operation.

The water will then flow into the MRC bio-chamber, which is fortified with an ultra high-capacity bio-media, giving you acres of biological surface area, helping you fight nitrates and phosphates. Unlike traditional bio-ball sumps, the MRC bio-sump® will never become a nitrate factory. The media also never needs rinsing, cleaning or replacing.

A large skimmer area and bubble baffles round out the design.

Add an optional probe holder & effluent-line holder and you have a complete filtration and monitoring headquarters!

As with all MRC sumps, the highest quality and finish you’ve come to expect applies.

MRC® Pro-1™ Protein Skimmer

Overview

The most efficient and advanced Calcium Reactor on the market. Easy to operate for optimal results.

Includes the revolutionary MRC® spray bar design that mixes the CO2 with the media in a more uniform pattern. The spray bar allows a full concentration of CO2 to penetrate the entire chamber of media allowing for low CO2 consumption and maximum output.

Ph Probe Holder & MRC Spray Bar included

Specs

System capabilities: 500 gallons

Total Height: 28″

Foot Print: 21″ x 20″

Reaction Chamber Tube OD: 10″

Chamber Thickness: 1/4″

Water inlet size: 1/2″ Nylon Barb

Gate Valve (Standard): 1 1/4″

Method of feeding: Gravity or Pump/Powerhead

Recommended Water Flow: 300-500 GPH

Water Pump: Included – Reeflo Dart Orca

MRC® Pro-2™ Protein Skimmer

Overview

The most efficient and advanced Calcium Reactor on the market. Easy to operate for optimal results.

Includes the revolutionary MRC® spray bar design that mixes the CO2 with the media in a more uniform pattern. The spray bar allows a full concentration of CO2 to penetrate the entire chamber of media allowing for low CO2 consumption and maximum output.

Ph Probe Holder & MRC Spray Bar included

Specs

System capabilities: 1,00 gallons

Total Height: 38″

Foot Print: 21″ x 20″

Reaction Chamber Tube OD: 10″

Chamber Thickness: 1/4″

Water inlet size: 1/2″ Nylon Barb

Gate Valve (Standard): 1 1/4″

Method of feeding: Gravity or Pump/Powerhead

Recommended Water Flow: 300-500 GPH

Water Pump: Included – Reeflo Dart Orca

MRC® Pro-3™ Protein Skimmer

Overview

Shown with optional Wash Down System*

The most efficient and advanced Calcium Reactor on the market. Easy to operate for optimal results.

Includes the revolutionary MRC® spray bar design that mixes the CO2 with the media in a more uniform pattern. The spray bar allows a full concentration of CO2 to penetrate the entire chamber of media allowing for low CO2 consumption and maximum output.

Ph Probe Holder & MRC Spray Bar included

Specs

System capabilities: 2,000 gallons

Total Height: 48″

Foot Print: 26″ x 28″

Reaction Chamber Tube OD: 12″

Chamber Thickness: 1/4″

Water inlet size: 1/2″ Nylon Barb

Gate Valve (Standard): 1 1/4″

Method of feeding: Gravity or Pump/Powerhead

Recommended Water Flow: 700-1,000 GPH

Water Pump: Included – Baldor 1/3HP

Find An Authorized Dealer

Purchase your Pro Skimmer from an authorized MRC® retailer today.